Metal X™ システム
金属部品
3Dプリンタ
ビルド容量
Z 軸の分解性能
50～125 μm（焼結後）プリント媒体
結合粉末フィラメントパーツの内部形状
クローズ・セル・インフィル（三角形）またはソリッド パーツプリント ベッド
加熱、自動レベリング、交換可能なプリント シートプリント
金属 FFF（熱溶解フィラメント製法）
洗浄タンク / 焼結炉
Wash-1
外形寸法
609 x 685 x 1,067 mm重量:
136 kg (300 lbs)- 12-72 hrs typical
- Opteon SF-79
Sinter-2
外形寸法
1,200 x 700 x 1,500 mm重量:
350 kg (772 lbs)- 17-31 hours
- 18,356 cu cm
- 1,300° C / 2,372° F
材料
リリース材料
セラミック — 焼結プロセス中に粉末になりますメディア（スプール）
結合粉末金属フィラメント
システムの詳細
Metal X Printer
The Markforged Metal X is a new kind of metal printer. By printing metal powder bound in a plastic matrix, Markforged has become the first company to eliminate the safety risks associated with traditional metal 3D printers. That means no loose powder, no lasers, and none of the traditional safety precautions. It’s safe to use in a shop environment with minimal facility upgrades.
In practice, the Metal X is essentially a very advanced FFF 3D printer. Featuring a precision machined gantry, a heated chamber and print bed, and advanced extrusion hardware, the Metal X is equipped to reliably print you durable parts. It is intentionally designed, with wear components and consumables — including print sheets, nozzles, and brushes — accessible and trivial to swap.
Wash-1
The Wash-1 is a solvent-based debinding system. It primarily uses Opteon SF-79, a high-performance fluid designed to offer superior cleaning power, higher efficiency, and safety in an environmentally sustainable way — Opeton SF-80 or Tergo Metal Cleaning Fluid can be substituted if needed.
The Wash-1 operates with simple ventilation and features an extremely simple user experience. It’s been tested and verified as a shop-safe system.
Sinter-2 and Sinter-1
The Markforged Sinter-2 and Sinter-1 are highly optimized tube furnaces used for sintering 3D printed metal parts. They provide best in class sintering reliability and run times and are equipped with advanced safety features. The Sinter-2 is more advanced than the Sinter-1 — featuring a larger working volume, more precise temperature control, and a mechanical door interlock.
The Sinter-1 and Sinter-2 typically have run times between 26 and 31 hours. However, the Sinter-2 can process small parts in express mode, where it can sinter up to 250g of parts in just 17 hours.
Metal X™ システム 材料
- Learn More
- Learn More
- Learn More
- Learn More
- Learn More
The Magic of Metal 3D Printing
The Metal X makes metal 3D printing simpler than it ever was before. Learn how you can go from design to functional 3D printed metal parts quickly, easily, and more affordably than ever before.
The Markforged Metal X additive manufacturing process combines metal injection molding (MIM) and fused filament fabrication (FFF) technologies together into Bound Powder Extrusion. BPE provides a simple, cost-effective way to create metal parts.